Scale generator - number of frets & start fret

[Hooray]

If I create a new scale via scale generator in an empty diagram, which includes e.g. the frets 9 to 15, then the scale generator displays "between the frets" with the default settings as when generating a scale last time. Therefore, in principle, I have to set 2x which number of frets and which initial fret I need.
It would make sense if the marked diagram passes the current number and the current starting fret to the scale generator, because otherwise I always have to enter this 2x.

I hope this is understandable, because it is translated via a translator from the German...

Thanks,
Hooray

[Justin]

Hi Hooray,

First of all, welcome to the forum & apologies for the delayed reply.. The translator has done well, it's pretty clear and easy to understand!

Thinking out loud, maybe what is needed is to have a button just below the sliders e.g. "As fretboard" which would change the range to match the selected fretboard. And/or an option in Preferences so you can switch the the default behaviour from "Last used" to this..

I'll raise a dev ticket for this and will give it some thought - thanks for the suggestion!